• Robust and user-friendly washing machine for inside cleaning of cylindrical and rectangular containers with brushes and simultaneous spraying with solvent, conductive brushes with type examination according to ATEX → no nitrogen inerting required
• Very good inside cleaning of cylindrical containers with a centrifugal folding brush.
• Inside cleaning of rectangular containers by a centrifugal brush with long bristles; by pressing a button on a rapid-action coupling, the operator can easily exchange the brush for a centrifugal folding brush
• Spraying system for washing with circulated solvent and rinsing with clean solvent.
• The brush is lowered into the container, and the upper container opening closed by the machine lid, by means of a pneumatic lifting frame
• Position sensor for the lid; spraying and brush rotation do not begin until the lid rests on the container
• Washing solvent in separate container, level switch for filling and draining
• Dirt resistant diaphragm pump as washing pump, separate pump for rinsing, pneumatic diaphragm pump for draining
• Filter with removable basket for protecting the evacuation pump and the solvent tank
• Flow monitor; the brush rotation does not start until solvent has been sprayed on the container to prevent dry friction
• Automatic washing program: washing – draining – rinsing – internal air extraction; program steps can be selected individually
• Explosion protection according to ATEX, category 1 (with type examination) for zone 0 inside, category 2 for zone 1 outside

• Centrifugal folding brush with active, reinforced contact pressure and much higher driving power, removes even very difficult residues
• 3D cleaning of rectangular containers with brushes rotating around 2 axes with variable speed and angle, better cleaning of inside container surfaces that are hard to reach for a conventional brush, such as corners, lid and floor
• Outlet cleaning system, manual or automatic
• Floor pan for the working area under the lifting frame
• Pneumatic lifting platform; the suction hose can be connected at a user-friendly height
• Pneumatic tilting of the machine (with the pneumatic lifting platform), better draining of containers with unfavorable floor/outlet geometry
• Electric clamping device
• Internal air extraction system, optionally with warm air drying for nonvolatile solvents
• Brush housing in the lid, reduced emissions during internal air extraction and drying
• External air extraction system, supplements/replaces the air extraction in the room/at the workplace
• Solvent concentration measuring and regulating system for connection to an exhaust air cleaning system

like model ROBUS, but with the following differences:

• Suitable for water-based/alkaline media
• Heating of the washing agent, heat insulation of the washing agent container
• Rinsing with water
• Explosion protection that is adapted to the washing agent with the washed-off contamination and to the requirements of the installation site